dea

ISB INSPECTION & SCOPE OF SERVICES:


From maintaining existing systems to designing and fabricating new solutions, customers will have peace of mind knowing we will expertly manage the job from start to finish. ISB provides all the necessary labor, materials, and equipment for a complete non-destructive examination of vessels within your facility. All deaerators and tanks, including those vessels designed as ASME or designated as non-ASME constructed, should be periodically inspected to ensure proper operation of equipment performance and safety of plant personnel.

A SAMPLE OF OUR SERVICES IS OUTLINED BELOW:


Deaerator pre-inspection requirements:

  • Review data reports
  • Perform Lock Out Tag Out
  • Cleanliness of the vessel interior is important to the inspection process. Deposits or scaling of any kind have the potential for masking discontinuities and rendering the inspection process and results flawed
  • Visual examination of internal and external welds
  • Identify any indications of corrosion, erosion, FAC, scale deposits, pitting, material thinning and weld cracking; noting location of any mechanical deficiencies and paying close attention at the intersections of circumferential and longitudinal seams.

Scope of inspection:

  • Tank inspection
  • Weld test(s)
  • Administer required repairs
  • Provide evaluation

TYPES OF DEAERATOR’S


Spray type:

Spray type deaerator is a cylindrical vessel used for the removal of dissolved gases from the feed water. Basically, the removal of dissolved gases is done by either decreasing the pressure or increasing the temperature inside the deaerator. The feed water fed into the deaerator will pass on through the vented section where the water will experience high steam which allows the feed water to remove dissolved gases. The spray type deaerator diagram is shown below.

spray

Tray type:

Tray type deaerator is a vertical dome place on the horizontal section of the vessel. The basic difference between a tray-type and spray type is in tray-type both a spray nozzle and trays are used.
By using both spray and trays, the mixing of air and water provides better heat exchange, and the dissolved gases present in the feed water are eliminated more efficiently. The diagram of this deaerator is illustrated below.

tray

OUR PARTNERS


24/7/365 EMERGENCY SERVICE

Call us directly for getting Emergency service.